Carpet Items
Cleaners
Degreasers
Disinfectants
Drain Care
Floor Care
Glass Cleaners
Hand Cleaners
Specialty Kits
Maintenance
Odor Control
Pest Elimination
Restroom Items
Ice Melters

WET LOOK
Delivers gleaming “wet look” with either high-speed or conventional buffing equipment.

• High solids content (24%) in Wet Look assures maximum floor protection. Polyurethane reinforced for top performance.

• Instant durability. Reaches maximum wear qualities immediately following burnishing. No 24-48 hour waiting period. Thermoplastic action toughens surface to fight wear.

• Defies black heel marks. Polyurethane reinforced to provide excellent durability, plus chemical resistance.

• Although designed to be burnished using super high-speed machines (1500-2000 rpm), Wet Look can also be maintained with conventional (175 rpm) equipment.

• When used with super high-speed machines, burnishing is as fast as a brisk walk - drastically reducing maintenance time and costs.

List price
4 gals./case #23004 $146.50
20-gal. drum #23002 $599.00

INITIAL APPLICATION:
1. Strip floor using Finish Buster according the label directions. Let floor dry.
2. Apply 4-6 thin coats using a clean applicator. Additional coats will produce even a higher gloss.
3. Allow 45-60 minute drying time between coats.
4. Let the final coat dry for one hour then burnish using a high-speed buffer (1500-2000 rpm) to a deep wet look.


TO MAINTAIN:
1. Sweep or dust mop floors to remove loose soil.
2. Clean floor periodically by damp mopping or machine scrubbing using a non-ammoniated cleaner such as Power Punch or NI-712 Disinfecting Cleaning Concentrate.
3. Burnish with high-speed equipment regularly or use conventional equipment to spray buff as needed to enhance the gloss and remove scuff-marks.